6 Easy Steps To Plan Commercial Metal Building

Commercial metal buildings are impressive structures in the industrial sector. Before the prefab steel structures, wooden and concrete facilities were common for industrial purposes. When you are planning for infrastructure for a business, it is a critical task for you.

However, if you plan for a traditional or modern commercial metal building, you must go through a plan. Without an effective strategy, it will be challenging for you to maintain consistency throughout the process.

At Viking Steel Structures, our metal building experts believe in a simple six-step plan for metal building installation. This sequential plan starts with essential planning and ends with getting approval from respective authorities. So, without waiting, let’s move to some efficient steps to plan commercial metal building installation.

6 Steps to Plan Your Commercial Metal Building

However commercial metal buildings are extensive in size, but you can break down the process into six easy steps. To ensure precision in the building planning process and meet all its purposes.

Start with Planning

Planning will be the first step for you to look forward to erecting a commercial metal building in the least possible time without any error. No matter how easy it is to install a metal building, it is always complex when discussing commercial-level metal buildings.

Due to extensive size and complex design, commercial steel structures take more effort than standard-size prefab steel structures. The success of the entire process depends on how efficient you are with your building plan.

In simple steps, planning a metal building involves people from:

• Higher-level management
• Engineering department
• Accounts department
• Building engineers

All these people will be planning for the floor layout of the structure. The plan for the commercial metal building includes the following steps:

• Deciding the size & design of the structure
• Budget estimation
• Blueprint layout
• Choosing the suitable material for the building

The planning stage comprises a detailed outline of the entire process so that nothing can go wrong.

Create Design for Structure

After the planning stage, creating the structure design is the first stage for plan execution. All the metal buildings Viking Steel Structures offers do come in standard configuration. Still, you can customize the standard design to gain high productivity during the operations.

Creating design for commercial metal buildings also comprises of multi-page building design plan where the building plan focuses on each component or part of the structure.

This process also includes the plan customization in the structure design specific to the operational needs. Metal building designing also includes ergonomic considerations to ensure the safe and secure movement of employees within the workplace.

Get Building Permit from Local Building Authority

Besides the size and design considerations, getting a clear span metal building permit is the most critical task. Without a license, there will be no liability for your structure. You must convey all building designs, layouts, and the rest of the details related to the metal building plan and construction.

In the process of getting the permit from the local building authority, specifications of prefab commercial metal buildings are compared to minimum structural requirements to generate a license for the proposed commercial structure.

The minimum building standards considered by the building authority depend on local climate, soil, and other geological factors. If the building design is according to the local building standards, you will easily get a permit for a metal building.

Keep the Site Ready

After planning, designing, and getting the permit from the local building authority, site preparation will be your next task. This process mainly moves around site preparation for the final installation process.

Process of site preparation starts with finding the right location for commercial metal building installation. You can select an appropriate site based on local building guidelines for the final installation process. For this, you can look for ground conditions, soil type, moisture content, and height of the ground at the point of installation.

Later the site selection, it is your responsibility to remove all vegetation from the ground and level the site. At last, the site preparation process is to pour foundation as per the building design and size.

For extensive commercial facilities, it is practical to use a hybrid foundation for commercial metal buildings. To ensure the longevity and stability of the structure, it would be better for you to plan a combination of perimeter and slab-type foundation. It will officer rigid base to your heavy machinery without any risk of collapse.

Install Commercial Metal Building

This is the last stage of the metal building installation, where a team of experienced metal building installers erects a metal building above the ground. Compared to previous steps, the installation stage is not difficult.

All installers must do is follow the basic installation standards and place the components according to the building layout.

The essential thing in the building installation process is the fitting of prefabricated components. You should place all pieces accordingly to prevent any kind of leakage or bend in the structure. Installation process also consists of a process in which the structure is also configured with the insulation layer. After installation and insulation, commercial steel structure is ready to use.

Get Approval Before Initiate Use

Before starting the commercial structure, you should take approval from the respective authority. This process begins with a building assessment, where a metal building expert analyzes all the components and joints of the structures.

The core reason for assessing metal buildings is to find an error that can lead to severe issues later. After getting approval from the respective authority, your metal building is ready for operation.

Plan Your Commercial Metal Building with Viking Steel Structures

Viking Steel Structures is known for providing best-in-class metal buildings. All the commercial-class metal buildings we offer are certified and designed to last decades without intense maintenance or repair work. Feel free to connect if you plan a new facility for business purposes. You can call us at 877-801-3263 or contact us online to book your metal building now.

By purchasing the metal building from us, you can get benefits like 20 years of rust-through and 10 years of side panel warranty. Besides the metal building warranty, you are also liable to claim 1 year of workmanship warranty if required.