Why Custom Metal Garages Requires A Permit

According to Craftsman survey, there are more than 82 million garages in America. Almost 91.7% of American owns at least one vehicle. Hence, the need for a storage unit for cars is obvious. However, with rising ownership of vehicles, some laws have been implemented for safety and public health. The construction and material rating method is done by an organization known as ICC.

International Code Council (ICC) defines a private garage as a structure for sheltering vehicles. It is regulated by section 406.3, classified as Group C occupancy. The maximum allowed size of all private garages is 1,500 sq. ft. or 30% of the size of the gross floor area of the dwelling unit. Under no circumstances can you build a garage bigger than the dwelling unit.

What Is A Garage Permit?

A permit is an official license to construct any building on your property. It is further regulated by building codes. In case you are wondering what’s the need for all this, let’s explain that as well.

A permit allows you to install any structure on a given site. You can only get a permit if your structural design complies with the local building code. Building codes are formulated such that your structure is safe for human habitat and for neighboring buildings as well.

Building codes also takes into account the local weather and frequently occurring natural disaster in your locality. Certified steel garages’ design must meet all guidelines to ensure that the structure is safe for humans, even in the event of a natural disaster or a fire breakout.

That being said, let’s move on to the next thing that could cross your mind.

How Much Does A Metal Garage Permit Cost?

On average, building permits cost around $500. It can range anywhere between $140 to $3,000. The minimal cost can be as low as $30, and the maximum can be as high as $6,000.

Various factors on which the permit fee will depend are –

• Size of your prefab steel garage
• Location
• Construction cost

Do You Need A Permit To Build A Prefab Steel Garage?

Yes – you need a permit to construct any kind of structure on your property, small or big. It is best to check with the local authority before buying a building. A design that does not comply with local building codes may end up in a troubling aftermath.

You may end up paying a hefty fine or, worse, removal of the whole structure. Viking Steel Structures offers certified steel garages that comply with your local code. So, pick up your phone & call now. Remember to mention your zip code to our team.

Only start construction projects once you know your permitting obligation. Make sure you get your design reviewed.

So, Who Is Eligible To Apply For A Permit?

The answer is a licensed contractor or a Building owner. Under one permit, you can apply for building, electrical, mechanical, or plumbing. Note that this may vary with state, so do check out your local laws.

How Much Time Does It Take To Get A Permit?

It takes an average of 6 to 12 months to gather data, submit documents, and get a permit.

Following Is The Procedure To Apply For A Permit:

In case you might be asking yourself how you can apply for a permit, let’s have a look at that as well. First of all, you can apply for your certified steel garage permit both online & offline. How?

You need to go to the official website of your local authority to fill out the form.

“But What Data Do I Need To Fill In A Building Permit Form?” you may ask. Here are some data that you would be required to fill.

• Type of building – A certified steel garage is generally a “Type II building.”
• Your address
• Size of your lot
• Estimate cost of construction
• Prefab metal garage description – length, height, width.
• Will street space be used during construction? Yes/ No
• Does the building extend beyond the property line? Yes/ No
• Area in sq. ft.
• Use of building
• Is the building designed for additional stories? Yes/ No
• General contractor, their address
• Architect or engineer, their address
• Your structure design

After filling out the form and paying the permit fee, you can submit your form online or offline.

Next comes the inspection part. An authorized person will go and check your site in person to see if your actual plan meets all the building code guidelines.

The inspection will occur between installing your prefab metal garage and after it is completely installed. The inspector will check if your structural design matches the city-approved plan.

In case it doesn’t, you may have to make some adjustments. If all’s well, your permit will be approved for your certified steel garage.

It is one of the most sought-after structures nowadays. For the value it comes with, it is a bargain on its own. Contact Viking Steel Structures to order one for yourself & enjoy the perks of several advantages that come with buying a steel garage –

• Long lasting structures
• Durable raw materials
• Pest and fire resistance
• Hassle free installation
• Undemanding upkeeps
• Eco friendly & sustainable
• Energy efficient structures

Get Certified Steel Garages By Viking Steel Structures:

Want to buy a high quality certified steel garage, see no further than Viking Steel Structures. We have the best deals along with custom buildings just for you. So, don’t delay any more; get your brand new prefab steel garage today!